Implementing HP ProLiant ML/DL Servers. : HP0-S12 Exam
Product Description
Exam Number/Code: HP0-S12
Exam Name: Implementing HP ProLiant ML/DL Servers.
“Implementing HP ProLiant ML/DL Servers.”, also known as HP0-S12 exam, is a HP certification.
Preparing for the HP0-S12 exam? Searching HP0-S12 Test Questions, HP0-S12 Practice Exam, HP0-S12 Dumps?
With the complete collection of questions and answers, Pass4sure has assembled to take you through 134 Q&As to your HP0-S12 Exam preparation. In the HP0-S12 exam resources, you will cover every field and category in HP Certification helping to ready you for your successful HP Certification.
Questions and Answers : 134 Q&As
Updated: May 16th , 2008
Question: 1
Which statement is correct regarding Transmit Load Balancing (TLB)?
A. TLB teaming has a maximum of four NICs in a team.
B. TLB requires an 802.3ad-capable switch to support TLB teaming.
C. NICs in TLB do not have Network Fault Tolerance (NFT) capability.
D. TLB can receive at 1000Mb/s (theoretical throughput) using four teamed Gigabit Ethernet
NICs.
Answer: D Question: 2
Which type of memory protection calculates a 72-bit syndrome for every 64 bits of data?
A. Automatic Parity Checking (APC)
B. Error Checking and Correcting (ECC) C. Error Detecting and Correction (EDC)
D. Battery Backed Write Cache (BBWC)
Answer: B Question: 3
Which script is sent securely by CPQLOCFG to iLO over the network?
A. RIBCL
B. RIBdos.vbs C. HPONCFG D. CPQLODOS
Answer: A Question: 4
What is a feature of SATA?
A. PIN efficiency is lower than ATA hard drives.
B. SATA host controllers recognize SCSI protocols.
C. SATA drives are daisy-chained during configuration.
D. It uses the same electrical and physical interfaces as Serial Attached SCSI.
Answer: D Question: 5
Arrange the tasks for iSCSI tunneling in sequential order by dragging and dropping the boxes. The Exhibit button for instructions on how to complete drag and drop items.
Page 1 of 36
TK
Exam Name: Implementing HP ProLiant ML/DL Servers.
Exam Type: HP
Exam Code: HP0-S12 Total Questions: 128
Answer:
Question: 6
A customer requires a Linux file server to be accessed by Windows and UNIX workstations. Which services should be installed to support this requirement? (Select two.)
A. MD B. NFS C. NSS D. SMB E. CUPS F. AutoFS
Answer: B, D Question: 7
A customer wants to connect an MSA30 DB storage solution to a ProLiant DL380 G5 server. Which Smart Array controller is required to connect both MSA connectors?
A. Smart Array 6i
B. Smart Array 641
Page 2 of 36
TK
Exam Name: Implementing HP ProLiant ML/DL Servers.
Exam Type: HP
Exam Code: HP0-S12 Total Questions: 128
C. Smart Array 642
D. Smart Array 6402
Answer: D Question: 8
Which resource gathers information for sizing, recommends tools, and helps to deploy a business solution?
A. ActiveAnswers
B. Product Bulletin
C. Enterprise Configurator
D. Sales Builder for Windows
Answer: A Question: 9
Which advanced memory protection technology avoids unplanned downtime due to a complete memory chip failure?
A. Online Spare
B. Standard ECC C. Advanced ECC
D. Mirrored Memory
Answer: D Question: 10
From which HP resource can you access a set of tools, e-Services and solution sizers to help plan and implement a suitable server solution for a customer?
A. HP Support Center
B. ActiveAnswers website
C. Solutions Programs Portal website
D. Channel Services Network website
E. Support and Troubleshooting website
Answer: B Question: 11
You need to estimate the run time for a UPS solution for some HP ProLiant servers. Which tool accomplishes this task?
A. UPS Sizing Tool
B. Power Distribution Utility
C. Rack and Power Manager
D. UPS Enterprise Configurator
Answer: A Question: 12
What are the preferred methods for multiserver deployment? (Select two.)
A. SmartStart
B. iLO Scripting
Page 3 of 36
TK
Exam Name: Implementing HP ProLiant ML/DL Servers.
Exam Type: HP
Exam Code: HP0-S12 Total Questions: 128
C. Rapid Deployment Pack
D. Insight Control Linux Edition
Answer: C, D Question: 13
Which management protocols can HP SIM use to automatically discover and identify HP servers, desktops, clusters, workstations, and portables? (Select three.)
A. DMI B. ICMP C. IGMP
D. SMTP E. SNMP
Answer: A, B, E Question: 14
Which products are ProLiant Essentials Value Pack options for configuration management?
(Select three.)
A. Automation Pack
B. Rapid Deployment Pack
C. Performance Management Pack
D. Integrated Lights-Out Advanced Pack
E. Remote Direct Memory Access Pack
Answer: B, C, D Question: 15
Which default port number is used with the following link to open HP Systems Insight Manager?
https://: A. 23
B. 2301
C. 2381
D. 50000
Answer: D Question: 16
Which ports must be open when using the HP SIM defaults through a firewall? (Select three.)
A. 22 (SSH) B. 23 (Telnet)
C. 8160 (Patrol)
D. 137 (NETBIOS)
E. 161 (SNMP Agent)
F. 5989 (HTTPS WMI Mapper)
Answer: A, E, F Question: 17
29 December, 2009
28 December, 2009
Pass4sure Microsoft TS Exam 70-633 v2.73
TS:MS Office Project Server 2007, Managing Projects : 70-633 Exam
Exam Number/Code: 70-633
Exam Name: TS:MS Office Project Server 2007, Managing Projects
“TS:MS Office Project Server 2007, Managing Projects”, also known as 70-633 exam, is a Microsoft certification.
Preparing for the 70-633 exam? Searching 70-633 Test Questions, 70-633 Practice Exam, 70-633 Dumps?
With the complete collection of questions and answers, Pass4sure has assembled to take you through 165 Q&As to your 70-633 Exam preparation. In the 70-633 exam resources, you will cover every field and category in TS helping to ready you for your successful Microsoft Certification.
QUESTION 1
You develop a Windows-Based application that accesses a Microsoft SQL Server
database named Certkiller 1. Users must supply a user name and password when
they start the application. This information is then used to dynamically build a
connection string.
When you test the application, you discover that it is not using the SqlClient
connection pooling feature.
You must reduce the time needed to retrieve information.
How should you modify the connection string?
A. to use the Windows user logon when connection to the Certkiller 1 database.
B. to use the SQL Server used login when connection to the Certkiller 1 database.
C. to use the same application logon ID and password for every connection to the
Certkiller 1 database.
D. to use the guest login ID and password for every connection to the Certkiller 1
database.
Answer: C
Explanation: We must use the same connection string to only use one connection
pool.
Note: The performance of the application can be enhanced by having the application
share, or “pool,” connections to the data source. When a connection is opened, a
connection pool is created based on an exact matching algorithm that associates the pool
with the connection string in the connection. Each connection pool is associated with a
Actualtests.org – The Power of Knowing
distinct connection string. When a new connection is opened, if the connection string is
not an exact match to an existing pool, a new pool is created.
Reference:
.NET Framework Developer’s Guide, Connection Pooling for the SQL Server .NET Data
Provider
Visual Basic and Visual C# Concepts, Introduction to ADO.NET Connection Design
Tools
Incorrect Answers
A, C: If we use different connection strings for different users we would not be using the
same connection pool.
D: Using the guest login ID is not good out of security reasons.
QUESTION 2
You use Visual Studio .NET to create an application that interact with a Microsoft
SQL Server database. You create a SQL Server stored procedure named
CertK OrderDetails and save it in the database. Other developers on your team
frequently debug other stored procedures.
You need to verify that your stored procedure is performed correctly. You need to
step through CustOrderDetails inside the Visual Studio .NET debugger.
What should you do?
A. Run CertK OrderDetails by using the Visual Studio .NET Server Explorer.
B. Step into CertK OrderDetails by using the Visual Studio .NET Server Explorer.
C. From the Command window, use Ctrl+E to run CertK OrderDetails.
D. Move CertK OrderDetails from the Visual Studio .NET Server Explorer window to a
Windows Form.
Run the application in Debug mode and step though CertK OrderDetails.
Answer: B
Explanation:
To debug a stored procedure from Server Explorer
1. Establish a connection to a database using Server Explorer.
2. Expand the database name node.
3. Expand the Stored Procedures node.
4. Right-click the stored procedure you want to debug and choose Step Into Stored
Procedure from the shortcut menu.
Reference: Visual Studio, Debugging SQL Stored Procedures
QUESTION 3
You responsible for maintaining an application that was written by a former
colleague at Certkiller . The application reads from and writes to log files located on
the local network. The original author included the following debugging code to
facilitate maintenance:
Actualtests.org – The Power of Knowing
ry {
Debug.WriteLine(”Inside Try”);
throw(new IOException());}
catch (IOException e) {
Debug.WriteLine (”IOException Caught”);}
catch (Exception e) {
Debug.WriteLine(”Exception Caught”);}
finally {
Debug.WriteLine (”Inside Finally”);}
Debug.WriteLine (”After End Try”);
Which output is produced by thus code?
A. Inside Try
Exception Caught
IOException Caught
Inside Finally
After End Try
B. Inside Try
Exception Caught
Inside Finally
After End Try
C. Inside Try
IOException Caught
Inside Finally
After End Try
D. Inside Try
IOException Caught
Inside Finally
Answer: C
Explanation: First the try code runs. Then one single exception, the IOException
occurs, not two exceptions. Then the Finally code segments executes. After Finally
code bas been executed normal application resumes at the next line after the line
that called the error. In this case, the After End Try code runs.
Reference: 70-306/70-316 Training kit, Creating an Exception handler, page 235
Incorrect Answers
A: An exception can only be caught once, not twice. Furthermore, the more specific
exception is caught.
B: The most specific exception, IOException, is caught.
C: The code after finally will run after exception has occurred and the application
resumes after the next line after the line that called the error.
Exam Number/Code: 70-633
Exam Name: TS:MS Office Project Server 2007, Managing Projects
“TS:MS Office Project Server 2007, Managing Projects”, also known as 70-633 exam, is a Microsoft certification.
Preparing for the 70-633 exam? Searching 70-633 Test Questions, 70-633 Practice Exam, 70-633 Dumps?
With the complete collection of questions and answers, Pass4sure has assembled to take you through 165 Q&As to your 70-633 Exam preparation. In the 70-633 exam resources, you will cover every field and category in TS helping to ready you for your successful Microsoft Certification.
QUESTION 1
You develop a Windows-Based application that accesses a Microsoft SQL Server
database named Certkiller 1. Users must supply a user name and password when
they start the application. This information is then used to dynamically build a
connection string.
When you test the application, you discover that it is not using the SqlClient
connection pooling feature.
You must reduce the time needed to retrieve information.
How should you modify the connection string?
A. to use the Windows user logon when connection to the Certkiller 1 database.
B. to use the SQL Server used login when connection to the Certkiller 1 database.
C. to use the same application logon ID and password for every connection to the
Certkiller 1 database.
D. to use the guest login ID and password for every connection to the Certkiller 1
database.
Answer: C
Explanation: We must use the same connection string to only use one connection
pool.
Note: The performance of the application can be enhanced by having the application
share, or “pool,” connections to the data source. When a connection is opened, a
connection pool is created based on an exact matching algorithm that associates the pool
with the connection string in the connection. Each connection pool is associated with a
Actualtests.org – The Power of Knowing
distinct connection string. When a new connection is opened, if the connection string is
not an exact match to an existing pool, a new pool is created.
Reference:
.NET Framework Developer’s Guide, Connection Pooling for the SQL Server .NET Data
Provider
Visual Basic and Visual C# Concepts, Introduction to ADO.NET Connection Design
Tools
Incorrect Answers
A, C: If we use different connection strings for different users we would not be using the
same connection pool.
D: Using the guest login ID is not good out of security reasons.
QUESTION 2
You use Visual Studio .NET to create an application that interact with a Microsoft
SQL Server database. You create a SQL Server stored procedure named
CertK OrderDetails and save it in the database. Other developers on your team
frequently debug other stored procedures.
You need to verify that your stored procedure is performed correctly. You need to
step through CustOrderDetails inside the Visual Studio .NET debugger.
What should you do?
A. Run CertK OrderDetails by using the Visual Studio .NET Server Explorer.
B. Step into CertK OrderDetails by using the Visual Studio .NET Server Explorer.
C. From the Command window, use Ctrl+E to run CertK OrderDetails.
D. Move CertK OrderDetails from the Visual Studio .NET Server Explorer window to a
Windows Form.
Run the application in Debug mode and step though CertK OrderDetails.
Answer: B
Explanation:
To debug a stored procedure from Server Explorer
1. Establish a connection to a database using Server Explorer.
2. Expand the database name node.
3. Expand the Stored Procedures node.
4. Right-click the stored procedure you want to debug and choose Step Into Stored
Procedure from the shortcut menu.
Reference: Visual Studio, Debugging SQL Stored Procedures
QUESTION 3
You responsible for maintaining an application that was written by a former
colleague at Certkiller . The application reads from and writes to log files located on
the local network. The original author included the following debugging code to
facilitate maintenance:
Actualtests.org – The Power of Knowing
ry {
Debug.WriteLine(”Inside Try”);
throw(new IOException());}
catch (IOException e) {
Debug.WriteLine (”IOException Caught”);}
catch (Exception e) {
Debug.WriteLine(”Exception Caught”);}
finally {
Debug.WriteLine (”Inside Finally”);}
Debug.WriteLine (”After End Try”);
Which output is produced by thus code?
A. Inside Try
Exception Caught
IOException Caught
Inside Finally
After End Try
B. Inside Try
Exception Caught
Inside Finally
After End Try
C. Inside Try
IOException Caught
Inside Finally
After End Try
D. Inside Try
IOException Caught
Inside Finally
Answer: C
Explanation: First the try code runs. Then one single exception, the IOException
occurs, not two exceptions. Then the Finally code segments executes. After Finally
code bas been executed normal application resumes at the next line after the line
that called the error. In this case, the After End Try code runs.
Reference: 70-306/70-316 Training kit, Creating an Exception handler, page 235
Incorrect Answers
A: An exception can only be caught once, not twice. Furthermore, the more specific
exception is caught.
B: The most specific exception, IOException, is caught.
C: The code after finally will run after exception has occurred and the application
resumes after the next line after the line that called the error.
25 December, 2009
MCSE Training Kit: Designing Microsoft Windows 2000 Network Security, Exam 70-220
Official Microsoft study guide for the skills you need on the job-and on the exam!
Make the right design decisions to protect your business network-and prepare for the Microsoft Certified Professional (MCP) exam-with this official Microsoft study guide. Work at your own pace through a system of case-study scenarios and tutorials to gain practical experience planning the security infrastructure for a Windows 2000 network. As you build these real-world design skills, you’re also preparing for MCP Exam 70-220-a core credit on the Windows 2000 MCSE track.
HERE’S WHAT YOU’LL LEARN:
Analyzing business requirements, including strategies, structures, and processes
Evaluating your company’s existing and planned technical environment
Identifying security risks and requirements and defining security baselines
Planning an authentication strategy and Public Key Infrastructure
Controlling access to resources using EFS, NTFS, security groups, and Group Policy
Designing security for Windows 2000 network services: DNS, Remote Installation Services (RIS), SNMP, and Terminal Services
Developing an IPSec data encryption scheme and management strategy
Providing secure connections for users of remote access services, VPNs, extranets, or the Internet
HERE’S WHAT’S INSIDE:
Comprehensive self-paced training manual that maps to MCP exam goals and objectives
Case study-based exercises that help you apply what you learn to the job
Summaries and end-of-chapter review questions to help gauge your progress
120-day evaluation version of Windows 2000 Advanced Server
All the book’s content-plus supplemental materials-on CD-ROM
NEW! Sample MCSE Readiness Review practice-test questions on-line. See “About This Book” for details.
——————————————————————————–
Customer Reviews
Customer Reviews: 6 Average Customer Rating:
Jun 20, 2003 MartyB from Minnesota
Excellent Resource
This is an excellent resource for preparing for the 222 exam. It is clear, concise, and very well written. I would also recommend supplimenting this resource with plenty of hands-on.
Jan 22, 2002 J Leeds from Atlanta GA
Believe it or not, a great training aid
Not only does this book cover the material on the exam thouroughly, it also does so in a way that really prepares you for the exam. Each chapter is structured as a case study, and each section of the chapter takes you through making decisions based on the case study. I was amazed that Microsoft Press actually had a good MCSE book available, but they do.
Dec 9, 2001 Zack B. from Los Angeles, CA
The Best MS press book I ‘ve ever read!!!
This book really worth the whole five stars. It is so different from the other books in that it contains a lot of case studies and questions. Also, I really believe that this book would be a good referance for exams 70-215 and 70-217
Dec 10, 2001 Tomas from Maryland
Content = 5 stars, Test prep = 2 stars
It’s an awesome book for general knowledge. It’s scope is way beyond the actual test (perhaps the test seemed narrow on focus because I did poorly– barely passed), but the book does not cover how to approach the more abstract, visual based questions.
I would use both this and other sources to study, because if you don’t know what Microsoft wants (it’s more than knowing what technologies are best applied in certain situations, but also extending to how to approach a confusing point-and-click question with not nearly half of the explanation you need to understand how two things are related).
For example, there are several questions interrelating abstract objects (laptop, vpn server, isp, etc..) via an even more abstract “relationship” (such as “Lan connection”, PPTP connection, etc..). Since the question is purposely abstract and confusing, I got stuck on the questions and no doubt got all of them wrong…. I didn’t understand it until after the test, but “relationship” means moreso which two objects have a common quality (such as a vpn connection between a laptop and a vpn server) rather than what quality one object uses with a second object ultimately for a third object (i.e., a laptop using a pptp connection THROUGH an ISP connection ULTIMATELY TO a vpn server). In this case, microsoft wants you to answer that the laptop and the vpn server are related via the vpn connection, and that the isp is not related at all to either of those via a “vpn connection” (in MY mind it WAS, since the vpn connection is physically going THROUGH the isp). Confusing. Hope this helps, though.
All in all, a really good book. I would definitely buy it, even if not taking the MS exam. It’s good enough for designing UNIX networks (just replace certain microsoft terms with the equivalent UNIX ones, such as “IIS” with “Apache”, “Active Directory” with “LDAP and Kerberos”, etc…).
I would recommend it for the exam, but PLEASE get a book that also talks about how to beat the exam (i.e., there are questions that are not multiple choice) and not just know the content.
Sep 11, 2001
Great Book
This is an outstanding book from MS. To the point, logical, clear, and regarding preparation for this exam, it is complete. A real pleasure to read.
Sep 8, 2001 Gareth from Toronto
Great…
The first MS Press book I’ve used which helped me pass this exam.
QUESTION 1
DRAG DROP
You need to design a naming strategy for the new internal and external domains.
You need to identify the appropriate domain name for each domain. You need to
ensure that your solution meets the business and technical requirements of IT
Training Institute.
What should you do? (To answer, drag the appropriate name space to the correct
location or locations in the work area.)
Actualtest.org- The Power of Knowing
Answer:
Explanation: The Chief Information Officer indicates that: “We have to keep the
domain name ittraining.com for our external network. We don’t want to use more
domain names and we want keep our domains separate.”
Therefore, the domain name ittraining.com must be used for the external network as IT
Training Institute will not be registering a new domain name. To keep the domain
separate, a different domain name should be used for the internal network.
Reference:
http://www.microsoft.com/resources/documentation/WindowsServ/2003/all/deploy
guide/en-us/dssbc_logi_lcbx.asp
QUESTION 2
DRAG DROP
You need to design a strategy for the migration of the internal network to Windows
Server 2003. Your solution must meet the business and technical requirements of IT
Training Institute.
What should you do? (To answer, move the appropriate actions from the list of
actions to the answer area and arrange them in the appropriate order. Use only
actions that apply.)
Actualtest.org- The Power of Knowing
Answer:
Explanation: A migration is accomplished by creating a new pristine Active
Directory on a new server. Then, you use a migration tool to copy the domain
information from your old domain to your new one. Here are some of the
advantages of this method:
1. Migration is gradual. You can migrate one department at a time.
2. Accounts are copied rather than moved, so you can return to the old domain if
necessary.
3. You avoid the complexity of taking existing database bugs and moving them into your
new Active Directory.
4. You can re-evaluate your existing domain structure and consolidate or expand your
domains, as you deem necessary.
Reference:
Michael Cross, Jeffery
A. Martin, and Todd
A. Walls: MCSE: Planning, Implementing,
and Maintaining a Windows Server 2003 Active Directory Infrastructure Study Guide &
DVD Training System, Syngress, Chapter 7, pp. 501.
QUESTION 3
You need to design the site topology for IT Training Institute’s internal domain.
You need to ensure that your solution meets the company’s business and technical
requirements.
Actualtest.org- The Power of Knowing
What should you do?
A. Create a site for each physical location and configure the default IP site link to only
allow replication between 9:00 P.M. and 3:00 A.M.
B. Set the replication interval on the default IP site link to 60 Minutes and configure the
default IP site link to only allow replication between 9:00 P.M. and 3:00 A.M.
C. Create a site for each physical location and configure the default IP site link to only
allow replication between 6:00 A.M. and 12:00 A.M.
D. Set the replication interval on the default IP site link to 30 Minutes and configure the
default IP site link to only allow replication between 6:00 A.M. and 12:00 A.M.
Answer: A
Explanation: The DFS object stores the DFS metadata for a domain-based
namespace. The DFS object is created in Active Directory when you create a
domain -based root, and Active Directory replicates the entire DFS object to all
domain controllers in a domain.
Incorrect Answers:
B: DFS is replicated with Active Directory; therefore you cannot set the replication
interval to every 60 minutes.
C: One of the goals in the case study says: “DFS replication must occur after hours.”
Therefore replication should not be allowed to occur up until 12:00 A.M. as this will be
well into the business day.
D: DFS is replicated with Active Directory; therefore you cannot set the replication
interval to every 30 minutes. Furthermore, replication should not be allowed to occur up
until 12:00 A.M. as this will be well into the business day.
Free download:pass4sure Microsoft 70-220
Free download:testking Microsoft 70-220
password:www.pass4sure.org
Make the right design decisions to protect your business network-and prepare for the Microsoft Certified Professional (MCP) exam-with this official Microsoft study guide. Work at your own pace through a system of case-study scenarios and tutorials to gain practical experience planning the security infrastructure for a Windows 2000 network. As you build these real-world design skills, you’re also preparing for MCP Exam 70-220-a core credit on the Windows 2000 MCSE track.
HERE’S WHAT YOU’LL LEARN:
Analyzing business requirements, including strategies, structures, and processes
Evaluating your company’s existing and planned technical environment
Identifying security risks and requirements and defining security baselines
Planning an authentication strategy and Public Key Infrastructure
Controlling access to resources using EFS, NTFS, security groups, and Group Policy
Designing security for Windows 2000 network services: DNS, Remote Installation Services (RIS), SNMP, and Terminal Services
Developing an IPSec data encryption scheme and management strategy
Providing secure connections for users of remote access services, VPNs, extranets, or the Internet
HERE’S WHAT’S INSIDE:
Comprehensive self-paced training manual that maps to MCP exam goals and objectives
Case study-based exercises that help you apply what you learn to the job
Summaries and end-of-chapter review questions to help gauge your progress
120-day evaluation version of Windows 2000 Advanced Server
All the book’s content-plus supplemental materials-on CD-ROM
NEW! Sample MCSE Readiness Review practice-test questions on-line. See “About This Book” for details.
——————————————————————————–
Customer Reviews
Customer Reviews: 6 Average Customer Rating:
Jun 20, 2003 MartyB from Minnesota
Excellent Resource
This is an excellent resource for preparing for the 222 exam. It is clear, concise, and very well written. I would also recommend supplimenting this resource with plenty of hands-on.
Jan 22, 2002 J Leeds from Atlanta GA
Believe it or not, a great training aid
Not only does this book cover the material on the exam thouroughly, it also does so in a way that really prepares you for the exam. Each chapter is structured as a case study, and each section of the chapter takes you through making decisions based on the case study. I was amazed that Microsoft Press actually had a good MCSE book available, but they do.
Dec 9, 2001 Zack B. from Los Angeles, CA
The Best MS press book I ‘ve ever read!!!
This book really worth the whole five stars. It is so different from the other books in that it contains a lot of case studies and questions. Also, I really believe that this book would be a good referance for exams 70-215 and 70-217
Dec 10, 2001 Tomas from Maryland
Content = 5 stars, Test prep = 2 stars
It’s an awesome book for general knowledge. It’s scope is way beyond the actual test (perhaps the test seemed narrow on focus because I did poorly– barely passed), but the book does not cover how to approach the more abstract, visual based questions.
I would use both this and other sources to study, because if you don’t know what Microsoft wants (it’s more than knowing what technologies are best applied in certain situations, but also extending to how to approach a confusing point-and-click question with not nearly half of the explanation you need to understand how two things are related).
For example, there are several questions interrelating abstract objects (laptop, vpn server, isp, etc..) via an even more abstract “relationship” (such as “Lan connection”, PPTP connection, etc..). Since the question is purposely abstract and confusing, I got stuck on the questions and no doubt got all of them wrong…. I didn’t understand it until after the test, but “relationship” means moreso which two objects have a common quality (such as a vpn connection between a laptop and a vpn server) rather than what quality one object uses with a second object ultimately for a third object (i.e., a laptop using a pptp connection THROUGH an ISP connection ULTIMATELY TO a vpn server). In this case, microsoft wants you to answer that the laptop and the vpn server are related via the vpn connection, and that the isp is not related at all to either of those via a “vpn connection” (in MY mind it WAS, since the vpn connection is physically going THROUGH the isp). Confusing. Hope this helps, though.
All in all, a really good book. I would definitely buy it, even if not taking the MS exam. It’s good enough for designing UNIX networks (just replace certain microsoft terms with the equivalent UNIX ones, such as “IIS” with “Apache”, “Active Directory” with “LDAP and Kerberos”, etc…).
I would recommend it for the exam, but PLEASE get a book that also talks about how to beat the exam (i.e., there are questions that are not multiple choice) and not just know the content.
Sep 11, 2001
Great Book
This is an outstanding book from MS. To the point, logical, clear, and regarding preparation for this exam, it is complete. A real pleasure to read.
Sep 8, 2001 Gareth from Toronto
Great…
The first MS Press book I’ve used which helped me pass this exam.
QUESTION 1
DRAG DROP
You need to design a naming strategy for the new internal and external domains.
You need to identify the appropriate domain name for each domain. You need to
ensure that your solution meets the business and technical requirements of IT
Training Institute.
What should you do? (To answer, drag the appropriate name space to the correct
location or locations in the work area.)
Actualtest.org- The Power of Knowing
Answer:
Explanation: The Chief Information Officer indicates that: “We have to keep the
domain name ittraining.com for our external network. We don’t want to use more
domain names and we want keep our domains separate.”
Therefore, the domain name ittraining.com must be used for the external network as IT
Training Institute will not be registering a new domain name. To keep the domain
separate, a different domain name should be used for the internal network.
Reference:
http://www.microsoft.com/resources/documentation/WindowsServ/2003/all/deploy
guide/en-us/dssbc_logi_lcbx.asp
QUESTION 2
DRAG DROP
You need to design a strategy for the migration of the internal network to Windows
Server 2003. Your solution must meet the business and technical requirements of IT
Training Institute.
What should you do? (To answer, move the appropriate actions from the list of
actions to the answer area and arrange them in the appropriate order. Use only
actions that apply.)
Actualtest.org- The Power of Knowing
Answer:
Explanation: A migration is accomplished by creating a new pristine Active
Directory on a new server. Then, you use a migration tool to copy the domain
information from your old domain to your new one. Here are some of the
advantages of this method:
1. Migration is gradual. You can migrate one department at a time.
2. Accounts are copied rather than moved, so you can return to the old domain if
necessary.
3. You avoid the complexity of taking existing database bugs and moving them into your
new Active Directory.
4. You can re-evaluate your existing domain structure and consolidate or expand your
domains, as you deem necessary.
Reference:
Michael Cross, Jeffery
A. Martin, and Todd
A. Walls: MCSE: Planning, Implementing,
and Maintaining a Windows Server 2003 Active Directory Infrastructure Study Guide &
DVD Training System, Syngress, Chapter 7, pp. 501.
QUESTION 3
You need to design the site topology for IT Training Institute’s internal domain.
You need to ensure that your solution meets the company’s business and technical
requirements.
Actualtest.org- The Power of Knowing
What should you do?
A. Create a site for each physical location and configure the default IP site link to only
allow replication between 9:00 P.M. and 3:00 A.M.
B. Set the replication interval on the default IP site link to 60 Minutes and configure the
default IP site link to only allow replication between 9:00 P.M. and 3:00 A.M.
C. Create a site for each physical location and configure the default IP site link to only
allow replication between 6:00 A.M. and 12:00 A.M.
D. Set the replication interval on the default IP site link to 30 Minutes and configure the
default IP site link to only allow replication between 6:00 A.M. and 12:00 A.M.
Answer: A
Explanation: The DFS object stores the DFS metadata for a domain-based
namespace. The DFS object is created in Active Directory when you create a
domain -based root, and Active Directory replicates the entire DFS object to all
domain controllers in a domain.
Incorrect Answers:
B: DFS is replicated with Active Directory; therefore you cannot set the replication
interval to every 60 minutes.
C: One of the goals in the case study says: “DFS replication must occur after hours.”
Therefore replication should not be allowed to occur up until 12:00 A.M. as this will be
well into the business day.
D: DFS is replicated with Active Directory; therefore you cannot set the replication
interval to every 30 minutes. Furthermore, replication should not be allowed to occur up
until 12:00 A.M. as this will be well into the business day.
Free download:pass4sure Microsoft 70-220
Free download:testking Microsoft 70-220
password:www.pass4sure.org
testking Microsoft MB3-230
Great Plains 8.0 Human Resources Payroll(U.S) : MB3-230 Exam
Microsoft Business Solutions MB3-230 Exam Q&As PDF download
We provide peofessional Microsoft Microsoft Business Solutions MB3-230 Exam information and free demo for Microsoft Business Solutions MB3-230 certification exam’s PDF. It is the best and the lastest Microsoft Practice Exams. Download our MB3-230 PDF,
We are committed to you ongoing success. Free Testking MB3-230 exam and MB3-230 Q&As are constantly being updated and compared to industry standards.
Great Plains 8.0 Human Resources Payroll(U.S)
Exam Number: MB3-230 Exam
Associated Certifications: Great Plains 8.0 Human Resources Payroll(U.S)
Duration: 150 questions
Available Language(s): English
Exam Details
MBS [ MB3-230 ]Great Plains 8.0 Human Resources and Payroll is one of the newest released exams for Microsoft Business Solutions Certificates. MB3-230 Pass4sure build the questions pool immediately after got the news from Microsoft Business Solutions provider, so candicates will get the latest material for preparing this exam from pass4sure. The candidate who successfully passed this exam indicates that he has mastered the knowledge and skills of AX 4.0 Development Introduction.
Free MB3-230 Exams’s PDF Download
Free Testking offers free demo for MB3-230 PDF(Great Plains 8.0 Human Resources Payroll(U.S)). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all Great Plains 8.0 Human Resources Payroll(U.S).
Recommended Training about MB3-230 exam PDF
The following courses are the recommended training for MB3-230 exam PDF.
MB3-230 Q & A with Explanations
MB3-230 Audio Exam
MB3-230 Study Guide
MB3-230 Preparation Lab
MB3-230 Exam: Freetestking’s Great Plains 8.0 Human Resources Payroll(U.S) PDF
The Great Plains 8.0 Human Resources Payroll(U.S) PDF for preparing for the MB3-230 exam – Freetestking’s Great Plains 8.0 Human Resources Payroll(U.S). Freetestking is your premier source for practice tests, and true testing environment. Nothing will prepare you for your next exam like a Freetestking. You find it all here at www.testking.name
QUESTION 260
You work as the application developer at Certkiller .com. You are developing a new
application named Certkiller App12. Certkiller App12 will be used to store customer
information on Certkiller .com’s customers who are dispersed across the continent.
You need to create internal utilities for Certkiller App12, and need to collect
information on all Certkiller .com’s customers that are located in Canada.
Choose the code segment which will perform this task.
A. foreach (CultureInfo culture in
CultureInfo.GetCultures(CultureTypes.SpecificCultures)) { // Output the region
information…}
B. CultureInfo cultureInfo = new CultureInfo(”CA”);
// Output the region information…
C. RegionInfo regionInfo = new RegionInfo(”CA”);
// Output the region information…
D. RegionInfo regionInfo = new RegionInfo(”");
if (regionInfo.Name == “CA”) {
// Output the region information…}
Actualtests.org – The Power of Knowing
Answer: C
Explanation: The RegionInfo class can be used to get information about a region.
A & B CultureInfo is used to control formatting, sorting & comparing of culture sensitive
data. E.g currencies, calendar dates etc.
D Does not initialise the RegionInfo object correctly i.e to Canada.
QUESTION 261
You work as the application developer at Certkiller .com. You are developing a new
application named Certkiller App06.
Certkiller App06 will be used to transmit confidential financial information over the
network. To secure the confidential data, you create an X509 Certificate object
named certificate and create a TcpClient object named client.
You must now create the code segment that creates an SslStream for
communication by applying the Transport Layer Security 1.0 protocol.
Choose the code segment which you should use.
A. SslStream ssl = new SslStream(client.GetStream());
ssl.AuthenticateAsServer(
certificate, false, SslProtocols.None, true);
B. SslStream ssl = new SslStream(client.GetStream());
ssl.AuthenticateAsServer(
certificate, false, SslProtocols.Ssl3, true);
C. SslStream ssl = new SslStream(client.GetStream());
ssl.AuthenticateAsServer(
certificate, false, SslProtocols.Ssl2, true);
D. SslStream ssl = new SslStream(client.GetStream());
ssl.AuthenticateAsServer(
certificate, false, SslProtocols.Tls, true);
Answer: D
QUESTION 262
You work as the application developer at Certkiller .com. You are developing a new
method that must pass data to another method named Certkiller Me2. Your method
accepts a string parameter named message.
The method you are writing must break the message parameter into individual lines
of text. Each individual line must then be passed to the Certkiller Me2 method.
Choose the code segment which you should use.
A. StringReader reader = new StringReader(message);
Certkiller Me2 (reader.ReadToEnd());
reader.Close();
B. StringReader reader = new StringReader(message);
while (reader.Peek() != -1) {
string line = reader.Read().ToString();
Actualtests.org – The Power of Knowing
Certkiller Me2 (line);
}reader.Close();
C. StringReader reader = new StringReader(message);
Certkiller Me2 (reader.ToString());
reader.Close();
D. StringReader reader = new StringReader(message);
while (reader.Peek() != -1) {
Certkiller Me2 (reader.ReadLine());
}reader.Close();
Answer: D
Explanation: StringReader.ReadLine() allows for lines to be read line by line.
A ReadToEnd() will read the entire stream.
B Read() will not read the line but only the next character.
C will not read from the message but will just give a string representation of the reader.
testking MB3-230
Questions and Answers : 150 questions Updated: October 13th , 2008 Price: $159.99 $125.99
Free download:testking Microsoft MB3-230
Free download:pass4sure Microsoft MB3-230
Microsoft Business Solutions MB3-230 Exam Q&As PDF download
We provide peofessional Microsoft Microsoft Business Solutions MB3-230 Exam information and free demo for Microsoft Business Solutions MB3-230 certification exam’s PDF. It is the best and the lastest Microsoft Practice Exams. Download our MB3-230 PDF,
We are committed to you ongoing success. Free Testking MB3-230 exam and MB3-230 Q&As are constantly being updated and compared to industry standards.
Great Plains 8.0 Human Resources Payroll(U.S)
Exam Number: MB3-230 Exam
Associated Certifications: Great Plains 8.0 Human Resources Payroll(U.S)
Duration: 150 questions
Available Language(s): English
Exam Details
MBS [ MB3-230 ]Great Plains 8.0 Human Resources and Payroll is one of the newest released exams for Microsoft Business Solutions Certificates. MB3-230 Pass4sure build the questions pool immediately after got the news from Microsoft Business Solutions provider, so candicates will get the latest material for preparing this exam from pass4sure. The candidate who successfully passed this exam indicates that he has mastered the knowledge and skills of AX 4.0 Development Introduction.
Free MB3-230 Exams’s PDF Download
Free Testking offers free demo for MB3-230 PDF(Great Plains 8.0 Human Resources Payroll(U.S)). You can check out the interface, question quality and usability of our practice exams . We are the only one site can offer demo for almost all Great Plains 8.0 Human Resources Payroll(U.S).
Recommended Training about MB3-230 exam PDF
The following courses are the recommended training for MB3-230 exam PDF.
MB3-230 Q & A with Explanations
MB3-230 Audio Exam
MB3-230 Study Guide
MB3-230 Preparation Lab
MB3-230 Exam: Freetestking’s Great Plains 8.0 Human Resources Payroll(U.S) PDF
The Great Plains 8.0 Human Resources Payroll(U.S) PDF for preparing for the MB3-230 exam – Freetestking’s Great Plains 8.0 Human Resources Payroll(U.S). Freetestking is your premier source for practice tests, and true testing environment. Nothing will prepare you for your next exam like a Freetestking. You find it all here at www.testking.name
QUESTION 260
You work as the application developer at Certkiller .com. You are developing a new
application named Certkiller App12. Certkiller App12 will be used to store customer
information on Certkiller .com’s customers who are dispersed across the continent.
You need to create internal utilities for Certkiller App12, and need to collect
information on all Certkiller .com’s customers that are located in Canada.
Choose the code segment which will perform this task.
A. foreach (CultureInfo culture in
CultureInfo.GetCultures(CultureTypes.SpecificCultures)) { // Output the region
information…}
B. CultureInfo cultureInfo = new CultureInfo(”CA”);
// Output the region information…
C. RegionInfo regionInfo = new RegionInfo(”CA”);
// Output the region information…
D. RegionInfo regionInfo = new RegionInfo(”");
if (regionInfo.Name == “CA”) {
// Output the region information…}
Actualtests.org – The Power of Knowing
Answer: C
Explanation: The RegionInfo class can be used to get information about a region.
A & B CultureInfo is used to control formatting, sorting & comparing of culture sensitive
data. E.g currencies, calendar dates etc.
D Does not initialise the RegionInfo object correctly i.e to Canada.
QUESTION 261
You work as the application developer at Certkiller .com. You are developing a new
application named Certkiller App06.
Certkiller App06 will be used to transmit confidential financial information over the
network. To secure the confidential data, you create an X509 Certificate object
named certificate and create a TcpClient object named client.
You must now create the code segment that creates an SslStream for
communication by applying the Transport Layer Security 1.0 protocol.
Choose the code segment which you should use.
A. SslStream ssl = new SslStream(client.GetStream());
ssl.AuthenticateAsServer(
certificate, false, SslProtocols.None, true);
B. SslStream ssl = new SslStream(client.GetStream());
ssl.AuthenticateAsServer(
certificate, false, SslProtocols.Ssl3, true);
C. SslStream ssl = new SslStream(client.GetStream());
ssl.AuthenticateAsServer(
certificate, false, SslProtocols.Ssl2, true);
D. SslStream ssl = new SslStream(client.GetStream());
ssl.AuthenticateAsServer(
certificate, false, SslProtocols.Tls, true);
Answer: D
QUESTION 262
You work as the application developer at Certkiller .com. You are developing a new
method that must pass data to another method named Certkiller Me2. Your method
accepts a string parameter named message.
The method you are writing must break the message parameter into individual lines
of text. Each individual line must then be passed to the Certkiller Me2 method.
Choose the code segment which you should use.
A. StringReader reader = new StringReader(message);
Certkiller Me2 (reader.ReadToEnd());
reader.Close();
B. StringReader reader = new StringReader(message);
while (reader.Peek() != -1) {
string line = reader.Read().ToString();
Actualtests.org – The Power of Knowing
Certkiller Me2 (line);
}reader.Close();
C. StringReader reader = new StringReader(message);
Certkiller Me2 (reader.ToString());
reader.Close();
D. StringReader reader = new StringReader(message);
while (reader.Peek() != -1) {
Certkiller Me2 (reader.ReadLine());
}reader.Close();
Answer: D
Explanation: StringReader.ReadLine() allows for lines to be read line by line.
A ReadToEnd() will read the entire stream.
B Read() will not read the line but only the next character.
C will not read from the message but will just give a string representation of the reader.
testking MB3-230
Questions and Answers : 150 questions Updated: October 13th , 2008 Price: $159.99 $125.99
Free download:testking Microsoft MB3-230
Free download:pass4sure Microsoft MB3-230
23 December, 2009
Pass4sure Microsoft MCAD.NET Exam 70-234
MCAD .NET Designing and Implementing Solutions with Microsoft Commerce 2000 Server : 70-234 ExamProduct Description
Exam Number/Code: 70-234
Exam Name: MCAD .NET Designing and Implementing Solutions with Microsoft Commerce 2000 Server
“MCAD .NET Designing and Implementing Solutions with Microsoft Commerce 2000 Server”, also known as 70-234 exam, is a Microsoft certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 94 Q&As to your 70-234 Exam preparation. In the 70-234 exam resources, you will cover every field and category in MCAD.NET helping to ready you for your successful Microsoft Certification.
Pass4sure don’t provide any actual questions and answers from Microsoft’s Certification Exams .
Free Demo Download
Pass4sure offers free demo for 70-234 exam (MCAD .NET Designing and Implementing Solutions with Microsoft Commerce 2000 Server). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.
Exam Details
Candidates for this exam operate in small to very large computing environments that use Microsoft Commerce Server 2000. Candidates have a minimum of one year’s experience developing e-commerce sites and two years’ experience designing applications by using Microsoft technologies. Candidates have a working knowledge of development tools such as Microsoft Visual Basic, Microsoft Visual C++, COM+, and ASP. Candidates also have a working knowledge of Microsoft Windows 2000, Active Directory, Internet Information Services (IIS), SSL, Microsoft SQL Server 2000 database management system (DBMS), and SQL Server 2000 Analysis Services. Candidates have a conceptual knowledge of network load balancing and firewalls.
QUESTION 1
You are implementing a new ad campaign Certkiller .com’s Commerce Server
site. The campaign will consist of three paid ads.
The company has ordered 3000 displays of the first ad and 200 displays of each of
the remaining two ads. Some pages within the site display two ads. You do not want
to display more than one of the company’s ads simultaneously on the same page.
What should you do to successfully display the appropriate ads?
A. Set goals based on the campaign.
Weight the first ad to 1 and the remaining two ads to 3.
Set the Exposure limit to 1.
B. Set goals based on the campaign.
Weight the first ad to 3 and the remaining two ads to 1.
Set the exposure limit to 2.
C. Set goals based on advertising items.
Create two new industry codes in the reference table.
Set one ad to one industry code, and set the remaining two ads to the other industry code.
D. Set goals based on advertising items.
Create one new industry code in the reference table.
Set each ad to this new industry code.
Answer:
QUESTION 2
You are developing a Commerce Server site for Certkiller .com. The site will sell
products from different vendors. Each vendor will have a separate catalog.
Certkiller .com will not fulfill orders. New orders will be sent dir4ectly to each
vendor for fulfillment.
You want to use Microsoft BizTalk Server to send orders to the vendors. How
should you implement this process?
A. Write a script in a Scriptorpipeline component to loop through an order and separate
the order into XML documents for each vendor.
Use BizTalk Server to send the appropriate XML document to each vendor.
B. Use the Splitter pipeline component to separate an order into Dictionary objects for
each vendor.
Use BizTalk Server to send the appropriate order information to each vendor.
C. Create a new database table that has column names that correspond to each
name/value pair in the OrderFromobject.
Use the Save Receipt pipeline component to save the combined order in this table.
Use BizTalk Server to separate the order and send the appropriate order to each vendor.
D. Use the ShippingMethodRouter pipeline component to separate the order based on a
user’s chosen shipping method.
Use BizTalk Server to send the appropriate order to each vendor.
QUESTION 3
You are developing a Commerce Server site. You want to use multiple data sources
as profile information. Currently, all of the Commerce Server Profile Service data is
located in a Microsoft SQL Server database. You want the Profile Service to also use an
Active Directory data store. You want to control file-level access.
Which two methods should you use to store the profile information so that both data
stores can be used? (Each Correct answer presents part of the solution. Choose
two.)
A. Use SQL Server to store nonvolatile data.
B. Use SQL Server to store frequently changing data.
C. Use Active Directory to store nonvolatile data.
D. Use Active Directory to store frequently changing data.
E. Use a Microsoft Access 2000 database to store nonvolatile data.
F. Use a Microsoft Access 2000 database to store frequently changing data.
Answer:
QUESTION 4
You are developing a Commerce Server site. You want to use multiple data sources
as profile information. Currently, all of the Commerce Server Profile Series data is
located in a Microsoft
Which two methods should you use to store the profile information so that both data
stores can be used? (Each correct answer presents part of the solution. Choose two.)
A. Use SQL Server to store nonvolatile data.
B. Use SQL Server to store frequently changing data.
C. Use Active Directory to store nonvolatile data.
D. Use Active Directory to store frequently changing data.
E. Use a Microsoft Access 2000 database to store nonvolatile data.
F. Use a Microsoft Access 2000 database to store frequently changing data.
Answer:
Pas4sure 70-234
Exam Number/Code: 70-234
Exam Name: MCAD .NET Designing and Implementing Solutions with Microsoft Commerce 2000 Server
“MCAD .NET Designing and Implementing Solutions with Microsoft Commerce 2000 Server”, also known as 70-234 exam, is a Microsoft certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 94 Q&As to your 70-234 Exam preparation. In the 70-234 exam resources, you will cover every field and category in MCAD.NET helping to ready you for your successful Microsoft Certification.
Pass4sure don’t provide any actual questions and answers from Microsoft’s Certification Exams .
Free Demo Download
Pass4sure offers free demo for 70-234 exam (MCAD .NET Designing and Implementing Solutions with Microsoft Commerce 2000 Server). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.
Exam Details
Candidates for this exam operate in small to very large computing environments that use Microsoft Commerce Server 2000. Candidates have a minimum of one year’s experience developing e-commerce sites and two years’ experience designing applications by using Microsoft technologies. Candidates have a working knowledge of development tools such as Microsoft Visual Basic, Microsoft Visual C++, COM+, and ASP. Candidates also have a working knowledge of Microsoft Windows 2000, Active Directory, Internet Information Services (IIS), SSL, Microsoft SQL Server 2000 database management system (DBMS), and SQL Server 2000 Analysis Services. Candidates have a conceptual knowledge of network load balancing and firewalls.
QUESTION 1
You are implementing a new ad campaign Certkiller .com’s Commerce Server
site. The campaign will consist of three paid ads.
The company has ordered 3000 displays of the first ad and 200 displays of each of
the remaining two ads. Some pages within the site display two ads. You do not want
to display more than one of the company’s ads simultaneously on the same page.
What should you do to successfully display the appropriate ads?
A. Set goals based on the campaign.
Weight the first ad to 1 and the remaining two ads to 3.
Set the Exposure limit to 1.
B. Set goals based on the campaign.
Weight the first ad to 3 and the remaining two ads to 1.
Set the exposure limit to 2.
C. Set goals based on advertising items.
Create two new industry codes in the reference table.
Set one ad to one industry code, and set the remaining two ads to the other industry code.
D. Set goals based on advertising items.
Create one new industry code in the reference table.
Set each ad to this new industry code.
Answer:
QUESTION 2
You are developing a Commerce Server site for Certkiller .com. The site will sell
products from different vendors. Each vendor will have a separate catalog.
Certkiller .com will not fulfill orders. New orders will be sent dir4ectly to each
vendor for fulfillment.
You want to use Microsoft BizTalk Server to send orders to the vendors. How
should you implement this process?
A. Write a script in a Scriptorpipeline component to loop through an order and separate
the order into XML documents for each vendor.
Use BizTalk Server to send the appropriate XML document to each vendor.
B. Use the Splitter pipeline component to separate an order into Dictionary objects for
each vendor.
Use BizTalk Server to send the appropriate order information to each vendor.
C. Create a new database table that has column names that correspond to each
name/value pair in the OrderFromobject.
Use the Save Receipt pipeline component to save the combined order in this table.
Use BizTalk Server to separate the order and send the appropriate order to each vendor.
D. Use the ShippingMethodRouter pipeline component to separate the order based on a
user’s chosen shipping method.
Use BizTalk Server to send the appropriate order to each vendor.
QUESTION 3
You are developing a Commerce Server site. You want to use multiple data sources
as profile information. Currently, all of the Commerce Server Profile Service data is
located in a Microsoft SQL Server database. You want the Profile Service to also use an
Active Directory data store. You want to control file-level access.
Which two methods should you use to store the profile information so that both data
stores can be used? (Each Correct answer presents part of the solution. Choose
two.)
A. Use SQL Server to store nonvolatile data.
B. Use SQL Server to store frequently changing data.
C. Use Active Directory to store nonvolatile data.
D. Use Active Directory to store frequently changing data.
E. Use a Microsoft Access 2000 database to store nonvolatile data.
F. Use a Microsoft Access 2000 database to store frequently changing data.
Answer:
QUESTION 4
You are developing a Commerce Server site. You want to use multiple data sources
as profile information. Currently, all of the Commerce Server Profile Series data is
located in a Microsoft
Which two methods should you use to store the profile information so that both data
stores can be used? (Each correct answer presents part of the solution. Choose two.)
A. Use SQL Server to store nonvolatile data.
B. Use SQL Server to store frequently changing data.
C. Use Active Directory to store nonvolatile data.
D. Use Active Directory to store frequently changing data.
E. Use a Microsoft Access 2000 database to store nonvolatile data.
F. Use a Microsoft Access 2000 database to store frequently changing data.
Answer:
Pas4sure 70-234
Subscribe to:
Posts (Atom)