pass4sure HP0-S12

Implementing HP ProLiant ML/DL Servers. : HP0-S12 Exam
Product Description
Exam Number/Code: HP0-S12
Exam Name: Implementing HP ProLiant ML/DL Servers.

“Implementing HP ProLiant ML/DL Servers.”, also known as HP0-S12 exam, is a HP certification.
Preparing for the HP0-S12 exam? Searching HP0-S12 Test Questions, HP0-S12 Practice Exam, HP0-S12 Dumps?

With the complete collection of questions and answers, Pass4sure has assembled to take you through 134 Q&As to your HP0-S12 Exam preparation. In the HP0-S12 exam resources, you will cover every field and category in HP Certification helping to ready you for your successful HP Certification.

Questions and Answers : 134 Q&As
Updated: May 16th , 2008

Question: 1
Which statement is correct regarding Transmit Load Balancing (TLB)?

A. TLB teaming has a maximum of four NICs in a team.
B. TLB requires an 802.3ad-capable switch to support TLB teaming.
C. NICs in TLB do not have Network Fault Tolerance (NFT) capability.
D. TLB can receive at 1000Mb/s (theoretical throughput) using four teamed Gigabit Ethernet
NICs.
Answer: D Question: 2
Which type of memory protection calculates a 72-bit syndrome for every 64 bits of data?

A. Automatic Parity Checking (APC)
B. Error Checking and Correcting (ECC) C. Error Detecting and Correction (EDC)
D. Battery Backed Write Cache (BBWC)
Answer: B Question: 3
Which script is sent securely by CPQLOCFG to iLO over the network?

A. RIBCL
B. RIBdos.vbs C. HPONCFG D. CPQLODOS
Answer: A Question: 4
What is a feature of SATA?

A. PIN efficiency is lower than ATA hard drives.
B. SATA host controllers recognize SCSI protocols.
C. SATA drives are daisy-chained during configuration.
D. It uses the same electrical and physical interfaces as Serial Attached SCSI.
Answer: D Question: 5
Arrange the tasks for iSCSI tunneling in sequential order by dragging and dropping the boxes. The Exhibit button for instructions on how to complete drag and drop items.

Page 1 of 36

TK

Exam Name: Implementing HP ProLiant ML/DL Servers.
Exam Type: HP
Exam Code: HP0-S12 Total Questions: 128

Answer:

Question: 6
A customer requires a Linux file server to be accessed by Windows and UNIX workstations. Which services should be installed to support this requirement? (Select two.)

A. MD B. NFS C. NSS D. SMB E. CUPS F. AutoFS
Answer: B, D Question: 7
A customer wants to connect an MSA30 DB storage solution to a ProLiant DL380 G5 server. Which Smart Array controller is required to connect both MSA connectors?

A. Smart Array 6i
B. Smart Array 641

Page 2 of 36

TK

Exam Name: Implementing HP ProLiant ML/DL Servers.
Exam Type: HP
Exam Code: HP0-S12 Total Questions: 128

C. Smart Array 642
D. Smart Array 6402
Answer: D Question: 8
Which resource gathers information for sizing, recommends tools, and helps to deploy a business solution?

A. ActiveAnswers
B. Product Bulletin
C. Enterprise Configurator
D. Sales Builder for Windows
Answer: A Question: 9
Which advanced memory protection technology avoids unplanned downtime due to a complete memory chip failure?

A. Online Spare
B. Standard ECC C. Advanced ECC
D. Mirrored Memory
Answer: D Question: 10
From which HP resource can you access a set of tools, e-Services and solution sizers to help plan and implement a suitable server solution for a customer?

A. HP Support Center
B. ActiveAnswers website
C. Solutions Programs Portal website
D. Channel Services Network website
E. Support and Troubleshooting website
Answer: B Question: 11
You need to estimate the run time for a UPS solution for some HP ProLiant servers. Which tool accomplishes this task?

A. UPS Sizing Tool
B. Power Distribution Utility
C. Rack and Power Manager
D. UPS Enterprise Configurator
Answer: A Question: 12
What are the preferred methods for multiserver deployment? (Select two.)

A. SmartStart
B. iLO Scripting

Page 3 of 36

TK

Exam Name: Implementing HP ProLiant ML/DL Servers.
Exam Type: HP
Exam Code: HP0-S12 Total Questions: 128

C. Rapid Deployment Pack
D. Insight Control Linux Edition
Answer: C, D Question: 13
Which management protocols can HP SIM use to automatically discover and identify HP servers, desktops, clusters, workstations, and portables? (Select three.)

A. DMI B. ICMP C. IGMP
D. SMTP E. SNMP
Answer: A, B, E Question: 14
Which products are ProLiant Essentials Value Pack options for configuration management?
(Select three.)

A. Automation Pack
B. Rapid Deployment Pack
C. Performance Management Pack
D. Integrated Lights-Out Advanced Pack
E. Remote Direct Memory Access Pack
Answer: B, C, D Question: 15
Which default port number is used with the following link to open HP Systems Insight Manager?
https://: A. 23
B. 2301
C. 2381
D. 50000
Answer: D Question: 16
Which ports must be open when using the HP SIM defaults through a firewall? (Select three.)

A. 22 (SSH) B. 23 (Telnet)
C. 8160 (Patrol)
D. 137 (NETBIOS)
E. 161 (SNMP Agent)
F. 5989 (HTTPS WMI Mapper)

Answer: A, E, F Question: 17